In case the soil is dry and hard, it is recommended to water the lawn a day before the installation. This will make pegging the wire to the ground much...
Installation FAQs
What is the max length perimeter wire for RK-M and RK-L models
RK-M 1000 – 800m (2600ft) RK-M 2000 – 800m (2600ft) RK-L 3000 – 800m (2600ft) RK-L 4000 – 800m (2600ft)
What is the suitable mowed area per RK-L model?
RK-L 3000 – up to 3000 square meters – 3/4 of an acre RK-L 4000 – up to 4000 square meters – 1 acre
What is the suitable mowed area per RK-M model?
RK-M 1000 – up to 1000 square meters – 1/4 of an acre RK-M 2000 – up to 2000 square meters – 1/2 of an acre
Maximum Wire Length for RS Models
When installing the perimeter wire, please be sure to follow the written instructions in the Operating and Safety Manual. Also, check to ensure that the installed perimeter wire length and...
What is the minimum distance between island installations and the perimeter wire?
For RC Models The minimum distance of the island installation from the perimeter wire should be 3.3ft (1m). The minimum distance of the perimeter wire from the protected area should...
How should I install the perimeter wire along a flat edge, a flower bed, small cliff (not more than 1/2in/1cm), or a small stair (up to 2in/5cm)?
For RC Models If the working area borders with a flat area, a flower bed, a small cliff (not more than 0.4in/1cm), or a small stair (up to 2in/5cm), the...
How should I install the perimeter wire along a wall or high obstacle?
For RC Models If the edge is sloped (a maximum of 10% is allowed), or is bordered with high obstacles such as a wall or fence, the Perimeter Wire should...
I have a Separated Zone (lawn area) from my main area. How can I install the Perimeter wire so Robomow will mow it?
If the Separated Zone is not connected to the Main Zone and Robomow cannot drive between these zones, then you have to define and install it as a Separated Zone....
Where is the best place to install the Base Station on the lawn?
Robomow’s Base Station must be placed along the Perimeter Wire, where the wire “loop” starts and ends. Other things to keep in mind when placing the Base Station: Place it...