For RC Models
The minimum distance of the island installation from the perimeter wire should be 3.3ft (1m).
- The minimum distance of the perimeter wire from the protected area should be 11in (28cm).
- If you need to protect a thin object, set the minimum radius of the island to 15in (35cm).

For RS Models
The minimum distance of the island installation from the perimeter wire should be 4.9ft (1.5m).
- The minimum distance of the perimeter wire from the protected area should be 11in (32cm).
- If you need to protect a thin object, set the minimum radius of the island to 15in (45cm).

For RX Models
The minimum distance of the island installation from the perimeter wire should be 6in (15cm).
- The minimum distance of the perimeter wire from the protected area should be 14.2in (36cm).
- If you need to protect a thin object, set the minimum radius of the island to 17.7in (45cm).
