The RK software could be updated. Please bring the RK to a servicing dealer for this upgrade. In the future, there may be an option to upgrade the software through...
Frequently Asked Questions
Can I pressure wash my RK’s mowing deck area?
No! Pressure washing the underside of the RK is not allowed!
Can I wash my RK’s mowing deck area?
No you can’t! The RK’s mowing deck can wiped clean with a wet rag if needed and while brushed with a softplastic brush, in order to clean it.
How to manage ordinary RK maintenance?
Ordinary and typical RK maintenance would include the following: Keep the mowing deck and blades area clean of dried/caked mulched grass, debris, toys etc. Make sure the blades are sharp...
What are the RK slopes limitations?
The RK slope limitations are: Main Mowed Area: 24 degrees (45%) 45cm rise per 1m (14in rise per 3.3ft) Lawn Edge: 11 degrees (20%) 20cm rise per 1m (6 inches...
How to install a perimeter island?
A perimeter island is set by laying the wire from the nearest lawn edge to the obstacle we want to protect, using RoboRuler at full length and wire goes back...
Is it possible to add a base station in a separate zone?
Yes. If a separate zone has its own perimeter wire, not attached to the main zone and its own base station.
What is a narrow pass and how to install it?
A narrow pass is a narrow area that’s wide enough for the mower to drive through, following the wire going to a subzone and coming back. It has to be...
How to handle tall, deep, and spongy grass?
Tall deep and spongy grass needs to be pre-mowed to around 75mm (3 inches)* in order to allow decent wire installation and initial mowing session by the RK. It is...
What are main zones possible shapes?
Main zones can have any given shape. Meaning “C” shape, “U” shape and even “O” shape, providing there are no areas narrower than 4-5 meters (14-16 feet). If there are...