This article is intended for Robomow professional dealers.
For RC and RS Models
The robot returns to the Base Station after a relatively short working time due to battery voltage drop. This can happen because the battery voltage fall below 20 volts or because one of the battery cells drops below 3 volts.
Problem or Cause | Corrective Action |
---|---|
Often malfunction caused by poor contact in one of the pins of the battery cable | Remove and insert the battery cable several times. Watch the Battery Replacement video for additional assistance. |
Check visually that no mechanical damage and all contacts are in place and also that no signs of corrosion or contamination on pins. | |
If the problem is not solved, then it is required to replace the Battery. |