Lay the wire at least 50cm (20 inches) from the Robotic mower neighbor’s installed wire. If your neighbor is using a Robomower, or other manufacturers robots, you may have to...
RK Model FAQs
How to lay the perimeter wire by a water hazard?
Lay the wire 1.2m (4ft) from the water edge. In case it is a seasonal puddle created by rain, take extra caution and lay the wire even farther away, based...
What obstacles need protection?
Obstacles that will not be recognized by the RK’s bumper or can cause harm to the mower or lawn features. Some examples: Water hazards, flowerbeds, holes, surface levels differences such...
What obstacles should be excluded from the mowed area?
An obstacle which is less than 1.2 meter (4ft) from the lawn edge, must be excluded from the installed area. Other obstacles to be excluded are any water hazards, swimming...
What obstacles do not need protection?
Hard solid obstacles, taller than 15cm (6 inches) that will be recognized by the RK’s bumper do not need protection. Examples: Solid tree trunks, large rocks, statues etc. Download the RK...
How to test the perimeter wire layout for mistakes and traps?
Place the robot on the wire, behind the base station. Send it to go home by pressing HOME on its display, and it will follow the wire all the way...
When and how to splice the perimeter wire?
We splice the perimeter wire in these cases: If one roll of wire isn’t enough and we need to add more wire If we cut the wire and need to...
How to install the perimeter wire?
Watch the “RK Installation” first, read the “Getting Started Guide” and “User Manual” for information andinstructions. Starting from the base, use one or two pegs to secure the wire, then...
How to set it up a Subzone?
A subzone can be set on either the RK’s display menu or on the Robomow app. Once set and given the right size, it should be added to Schedule, so...
What is a Separate Zone and how to mow it?
A separate zone is an area the RK cannot reach by itself, due to walls, fences, level difference and conditionswhere a narrow pass cannot be used. The user carries the...